• Graphic Display Unit - Edu-Logger

  • 900-214
  • In Stock
  • Add to favourites

  • £141.58excluding VAT

    £169.90 including VAT

  • The Graphic Display unit (GDU) is used to run experiments without a PC. The GDUdisplays the sensor's measurements in digital and graphical forms.  It can also be used to program the sensor's experiment setup as well as viewing the input from up to five sensors at a time.

     

    This unit has a user-friendly design with a color graphic display and touch screen.

     

    The Graphic Display unit is used when a PC is not available for each group. It can work with up to

    5 sensors in parallel.

     

    Some of the module's features are:

    • Automatic recognition of sensors.
    • Uses preset experiment parameters for easy initiation
    • Communicates with all the sensors or one at a time.
    • Controls each sensor's range and measurement units.
    • Internal charging circuit is incorporated.
    • Mode to view sensor values in real time – up to five at a time.

    •  Automatic Power-Off for longer battery life.

    Sensors are connected to the GDU via its USB (A) socket. Remote connection is also possible by lugging an RF Communication module into it and another into the sensor or sensor chain. This enables both setting up and analyzing the collected data.

     

    The GDU can be connected to a chain of sensors ending with the battery module connected to the last sensor of the chain.

     

    When the GDU receives power, it starts scanning and identifies the connected sensors.  The located sensors are displayed on the left side of the screen.

     

    As with all Edu-Logger Sensors this must be used with the Edulogger USB module or the Wi-Fi module

    • Bullet Point Converts the measured parameter into a processed value (°C, °F, Lux, dB, mA, V, etc.)
    • Bullet Point Sends the data in digital form to a viewer unit, any kind of computer or tablet
    • Bullet Point Saves up to 5 experiments in its flash memory
    • Bullet Point Calibration is done by pressing a push-button
    • Bullet Point Changing ranges and gains is done through software
    • Bullet Point Experiments run with or without a computer
    • Bullet Point Saved experiments in the Logger Sensor can be uploaded to a computer at any time
    • Bullet Point The modular plug and play system allows the connection of sensors in a chain, in any order
    • Bullet Point Each sensor is in itself a full data acquisition system
    • Bullet Point Unbeatable value for money
    • Bullet Point Robust hardware and attractive design
    • Bullet Point Very simple operation
    • Bullet Point No cable clutter and therefore a very simple construction of experiments
    • Bullet Point System allows wireless connection
  • Nobody has left a review for this product yet, be the first to do so. Leave Review

Product Reviews

Nobody has left a review for this product yet, be the first to do so.

Leave a review